Displaying turkey beards, which are the tufts of feathers located on the breast of a harvested wild turkey, can be a great way to preserve and showcase your hunting achievements. Here’s how to display turkey beards effectively:
Materials You’ll Need:
- Turkey beards
- Small wooden plaque or display board
- Mounting screws or hooks
- Wood stain or paint (optional)
- Drill and screws
- Screwdriver or drill driver
- Small saw (if trimming the plaque)
- Sandpaper (if staining or painting)
- Measuring tape or ruler
- Pencil
- Clear epoxy resin (optional)
- Small brush for epoxy (if using)
Steps to Display Turkey Beards:
- Prepare the Display Plaque:
- Start by selecting a small wooden plaque or display board. You can purchase one from a craft store or create your own by cutting a piece of wood to your desired size and shape. Sand the edges to smooth them out.
- Stain or Paint the Plaque (Optional):
- If you prefer a stained or painted finish, apply your chosen stain or paint color to the wooden plaque. Allow it to dry completely before moving on to the next step.
- Arrange the Turkey Beards:
- Lay out your turkey beards on the plaque to determine the best arrangement. You can choose to display them in a straight line or stagger them for a more dynamic look.
- Mark the Position:
- Use a pencil to mark the positions where you want to attach the turkey beards on the plaque. Ensure they are evenly spaced and aligned as desired.
- Drill Holes or Attach Hooks:
- Depending on the size of your turkey beards, you can either drill small holes where you marked the positions or attach small hooks or screws. If drilling holes, make sure they are slightly smaller than the shafts of the beard feathers, so they fit snugly.
- Attach the Turkey Beards:
- Insert the shafts of the turkey beards into the holes or hooks you’ve prepared on the plaque. Ensure they are securely attached and sit at the desired angle.
- Secure the Beards:
- If the turkey beards feel loose, you can secure them with a small amount of clear epoxy resin. Apply a small drop of epoxy where the shaft enters the hole or hook. Be careful not to use too much, as it can drip and create a messy finish.
- Clean and Finalize:
- Clean any excess epoxy or stain/paint from the display plaque to ensure a neat appearance.
- Hang or Display:
- Attach a picture hanger or wire to the back of the display plaque for easy hanging on a wall. Alternatively, you can lean it on a shelf or tabletop for display.
- Label or Decorate (Optional):
- Consider adding a small plaque or label with the date and location of the turkey hunt to personalize the display.
By following these steps, you can create an attractive and memorable display for your turkey beards that showcases your hunting achievements. It’s a great way to preserve and celebrate your outdoor experiences.
Also Read:
https://incentivepost.com/how-to-dissolve-orbeez-in-drain/
https://incentivepost.com/how-to-dissolve-paper-towels-in-pipes/
https://incentivepost.com/how-to-dissolve-under-eye-filler-at-home/
https://incentivepost.com/how-to-dissolve-water-beads-in-drain/
https://incentivepost.com/how-to-divide-calla-lilies/
