how to disable awd on dodge charger

The Dodge Charger typically comes with rear-wheel drive (RWD) as its standard configuration, but some models may have all-wheel drive (AWD) as an option. To disable the AWD system and switch to rear-wheel drive (RWD) mode on a Dodge Charger equipped with AWD, you can follow these steps:

Please note that these steps are general guidelines, and specific instructions may vary depending on your Charger’s model year and trim level. Refer to your vehicle’s owner’s manual for precise instructions.

Steps to Disable AWD on a Dodge Charger:

  1. Start the Engine: Ensure the engine is running.
  2. Locate the AWD Controls: In some Dodge Charger models with AWD, there may be a control button or switch on the center console or dashboard that allows you to switch between AWD and RWD modes. Look for a button labeled “AWD,” “RWD,” “2WD,” or a similar designation.
  3. Press the Button or Switch: To disable the AWD system and switch to RWD mode, press the button or switch. You may need to press and hold it for a few seconds, or it may be a simple toggle switch.
  4. Check the Dashboard Indicator: On the instrument cluster or dashboard, there should be an indicator light or display that confirms the AWD system is switched off, and the vehicle is now in RWD mode.
  5. Drive Carefully: Once you’ve switched to RWD mode, drive the vehicle carefully, especially in slippery or adverse weather conditions. RWD vehicles may have different handling characteristics compared to AWD vehicles, particularly in terms of traction.
  6. Re-enable AWD (If Needed): If you wish to re-enable the AWD system, follow the same steps but press the AWD button or switch again. The indicator light should confirm that the AWD system is active.

It’s essential to use the AWD and RWD modes appropriately based on driving conditions. AWD is typically advantageous for enhanced traction in slippery conditions, while RWD may provide a sportier driving experience in fair weather.

If your Charger does not have a dedicated AWD control button or switch, the vehicle may automatically engage AWD as needed based on road conditions. In such cases, there may not be a manual way to disable the AWD system, and it will engage when required for traction.

Always refer to your vehicle’s owner’s manual for precise instructions regarding the operation of the AWD system in your specific Dodge Charger model.

Also Read:

Related Articles

Leave a Reply

Back to top button